Red Gloss Fixture

Because the room is a completely visual environment, lighting is one of the most critical elements. , With good lighting, you can enjoy images crisp on the screen as you move safely to get popcorn or a glass of wine. Bad lighting, however, will wash out the images and $ 15,000 projector out as a warehouse for $ 800 special office supplies.

From a performance standpoint, the best rooms are a good mix video projector, screen and room lighting, and the challenge is to provide an overall design that performs very well when the lights are low. Let's start with the screen. It is important that your perfect screen size for the room, because a large screen is reduces image contrast and accentuate pixelization. Choose a smaller screen of a sharper image - the result, you will find, is a sort of sitting in the center of the theater, rather than in the first row, where the screen is too big for his vision.

Next, you need to ensure a relatively dark room with little ambient light. Forget daylight or windows, or install black tones. The reason is the opposite, is the relationship screen image to the screen black-white image. Black is not really black but rather a low light level depending on both ambient light room and the interrelationship images that reflect the light bounces off the walls and ceiling of the room. Make sure the room itself is not causing problems of lighting and contrast image. Use mostly dark wall coverings, especially around the screen. Do not hesitate to paint the room, including ceiling, a dark color, because otherwise the light of his screen image is reflected off the ceiling and then washed the image. It is well that the use of saturated colors like red or blue always and when color is deep and low reflectance. Avoid shiny or gloss finish, bright paintings. The most critical are the surfaces of roof and walls at the front of the room, and the wall at the back of the room.

Finally, it is necessary to take into account the fact that the room, such as video, should be dynamic. Upon entering the room, the room decor and architecture is very important. Then, through the use of dimming and integration of systems, lights fade, and the function of the room and comfort become the dominant themes.

Lighting for the room tends to be divided between lighting functional, which ensures the ability to move in and do the critical tasks, and decorative lighting, which is chosen more for the appearance and character of the lamp lighting and effects. Decorative lighting should be turned off during the program, which can be anything, whose style and appearance are a suitable match for decoration. There are literally thousands of options for wall sconces, pendants, chandeliers and complying with the law. (I'm not sure I'd recommend a crystal chandelier, because crystal facets may actually cause disturbing reflections from the screen, but it depends on you.)

The hardest part of the lighting home theater lighting is functional. With good design, you can read a detailed description on a DVD cover with minimal impact on the contrast of the screen, and then find their way to the door while others watch the program. For this type of lighting, a little goes a long way, and sensitivity is highly desirable. Most importantly, use lights that cast no light on the screen.

I tend to use two functional lighting systems. One is the highest level "task" lighting, and the other is security / lighting system step. Accessories for the task I prefer low voltage lighting, usually with a good protector and lamps MR16 narrow flood. Keep the lights at least 4 feet away from the wall so that no light spills into a wall. You can get good results recessed under voltage track lighting and monorail lighting. Be sure to place these lights in their own regulator, as you will want to turn them off once the film has been installed. Avoid regular "cans" in the indoor theaters - tend to wash their images on screen.

There are many ways to provide step lighting. Consider the real step lights, given that the smallest LED lamp and xenon lights step are usually all you need. Other designs, such as those using linear bands of light footsteps on the ground, will be inspired by the architecture of the room and finishes. Remember to always highlight the measures and changes in level - which is fine for moving from one pond to light on a flat floor, but if it's steps, make sure that the switch is in one of the pools of light.

Connect these lighting systems for modern regulatory and permit the integrated control of lighting along with the rest of the home theater electronics. Even if the house not have a dimming system, using preset regulators in the theater. This will make it easier to push a button and have the lights - Projection -- action, the fundamental characteristic of a real home theater.

About the Author:

Keith is an avid member of the lighting and home furnishings industry. At Bellacor, he helps customers with various home improvement design issues including lighting, furnishings, and decor.

Article Source: ArticlesBase.com - Set the Stage for Entertainment With Home Theater Lighting

15.75 Majorca One Light Pendant Finish: Black Gloss Glaze $228.75 P102+-BG Finish: Black Gloss Glaze The open channel along the rim of the cornice adds even more ambient light to this classic piece. The popular Majorca style is also available in coordinating wall sconce and corner sconce versions. This pendant may be customized with any of over 50 hand applied faux finishes. Pendants come with a canopy and 6 feet of cord, in black or white, which can be cut to ...

15.75 Majorca One Light Pendant Finish: White Gloss Glaze $228.75 P102+-WG Finish: White Gloss Glaze The open channel along the rim of the cornice adds even more ambient light to this classic piece. The popular Majorca style is also available in coordinating wall sconce and corner sconce versions. This pendant may be customized with any of over 50 hand applied faux finishes. Pendants come with a canopy and 6 feet of cord, in black or white, which can be cut to ...

Aladdin One Light Wall Sconce Finish: Black Gloss Glaze, Bulb Type: Fluorescent, Wet Location Single Socket: No $256.88 G1D+BG1PL13 Finish: Black Gloss Glaze, Bulb Type: Fluorescent, Wet Location Single Socket: No Simple, bold and eye-catching. Crisp yellow frames three distinctive red squares, fusing into a modern masterpiece. For even more contrast, consider our finishing options. Features: -Wall sconce. -Available in solid acrylic color, faux or glaze finishes. -Available with or without wet location single soc...